HEIDENHAIN iTNC 530 Service Manual page 127

After having recorded a LOGIC DIAGRAM, you can save it on the hard disk of the control:
Saving the
LOGIC DIAGRAM
recording
A saved LOGIC DIAGRAM recording can be called again:
Calling the
LOGIC DIAGRAM
recording
Also the integrated oscilloscope offers the possibility to record inputs, outputs, markers and
Further possibilities
the control signals of timer and counter! It is also possible to record bytes, words and double
with the integrated
words with 6 channels available.
oscilloscope
See "Integrated Oscilloscope" on page 10 – 99!
July 2010
Press this soft key.
Confirm with the ENT key.
--> The logic diagram is saved under PLC:\TRCSAVE.A.
Press this soft key.
Confirm with the ENT key.
--> The contents of the LOGIC DIAGRAM diagram is saved under PLC:\TRCSAVE.A.
11 – 127