Tables For Power Supply Modules, Power Stages And Motors - HEIDENHAIN iTNC 530 Service Manual

20.1.2 Tables for power supply modules, power stages and motors

Via the name of the power supply module (MP 2198.x), the power stage used (MP 2100.x) and
the motor (MP 2200.x), the control can access the values in the respective power supply
module, power stage and motor tables.
How to access the tables:
Table of power
supply modules
20 – 326
Open the machine parameter list.
Place the cursor on the respective power supply module (e.g.,GOTO2198).
Switch to the next soft-key row.
Press this soft key. --> The table with the power supply modules appears:
Note
The original table (SUPPLY.SPY) contains power supply modules of various manufacturers as
well as HEIDENHAIN compact inverters.
Note
The original table of power supply modules by HEIDENHAIN is stored in the SYS partition
of the hard disk.
The OEM can create his own table of power supply modules (with additional power supply
modules and/or edited data) which is stored in the PLC partition of the hard disk.
If the designation of supply module tables (SUPPLY.SPY) is the same, the data of the OEM
table have priority.
DANGER
Do not change any values in the supply module table!
This could lead to damage to property or persons!
HEIDENHAIN Service Manual iTNC 530