Adjusting Ethernet
If you want to adapt the iTNC 530 to your laptop:
settings on the
control
In the prompt enter, e.g. the ipconfig command (or you enter the winipcfg command,
depending on the Windows version).
Now adapt the network settings of the iTNC 530:
With the dual-processor control:
July 2010
Write down the IP address and subnet mask of your laptop:
Note
You can also find this information in My Computer \ Control Panel \ Network ...
Adapt the network settings in Windows:
Start --> Control Panel --> Network Connections --> Local Area Connection --> Properties -->
Internet Protocol (TCP/IP) --> Properties.
Before that write down the original settings.
13 – 175