Proceeding Up To Nc Software 34049X-02 (Single-Processor Version) - HEIDENHAIN iTNC 530 Service Manual

14.3 Proceeding up to NC Software 34049x-01 (Single-Processor Version)
Equivalent file name extensions in binary and ASCII format
.H
.TCH
.PNT
14 – 210
Call the machine parameter list with the corresponding code number.
Now press the MOD key.
Press the UPDATE DATA soft key.
Press the BIN --> ASC softkey to convert the files on the hard disk from binary to
ASCII format.
.H% .I
.TC% .D
.PN% .COM
Press the soft key NCVER --> All NC software versions on the control now appear in the
following selection window.
The currently used software version is distinguished by an asterisk in the first column Sel.
Place the cursor to the marked NC software version!
DANGER
You may only activate the NC software currently used by the machine!
A change to another NC software version is not described in this Service Manual and must
only be made in agreement with the machine manufacturer.
Press the SELECT soft key.
.I% .T
.D% .P
.CO% .CMA
HEIDENHAIN Service Manual iTNC 530
.T%
.P%
.CM%