HEIDENHAIN iTNC 530 Service Manual page 94

Calling the drive Up to and including NC software version 34049x-03:
information
9 – 94
Shut down and switch off the machine.
Switch on the machine; do not confirm the Power interrupted message.
Select the Programming and Editing mode of operation
(the program manager must not be open).
Press the MOD key.
Press the DIAGNOSIS soft key.
Press the DRIVE DIAGNOSIS soft key. --> A new window opens:
Note
The DRIVE DIAGNOSIS soft key is only visible until the Power interrupted is confirmed.
HEIDENHAIN Service Manual iTNC 530