26.3 Display of Important System Information
When you consult your machine manufacturer or HEIDENHAIN in the event of an error or a
malfunction of your machine, it is important that you know which NC and PLC software is
installed on the iTNC.
Calling the display
Display for NC
software 340420-xx
to 340480-xx
NC software
340480
08
July 2010
Select the Programming and Editing operating mode.
Press the MOD key.
Note
Which information is now displayed depends on the NC software installed!
Program number of the NC software
Version of the NC software
Note
Additionally, a service pack can be installed which is then displayed after the NC software
version, e.g., 340480 08 SP1.
26 – 443