HEIDENHAIN iTNC 530 Service Manual page 633

MP Function and input
MP7510 Transformed axis
(only possible Format:
via the old Input:
kinematics Bit 0 corresponds to axis X
table) Bit 1 corresponds to axis Y
Bit 2 corresponds to axis Z
Bit 3 corresponds to axis A
Bit 4 corresponds to axis B
Bit 5 corresponds to axis C
MP7510.0-14 Transformation 1 to transformation 15
MP7520 Additional code for transformation
(only possible Format:
via the old Input:
kinematics 0: Swivel head
table) 1: Tilting table
Bit 1 – Type of dimension in MP7530.x
0: Incremental dimension for swivel head
1: Absolute with respect to the machine datum for tilting table
MP7520.0-14 Transformation 1 to transformation 15
MP7530 Type of dimension for transformation
(only possible Entry:
via the old 0: Free tilting axis
kinematics
table)
MP7530.0-14 Transformation 1 to transformation 15
MP7550 Home position of the tilting element
(only possible Input:
via the old
kinematics
table)
MP7550.0 A axis
MP7550.1 B axis
MP7550.2 C axis
July 2010
%xxxxxx
0: End of the transformation sequence
%xx
Bit 0 – Tilting axis
Entry of a formula is possible
-99 999.9999 to +99 999.9999
SW version
and
behavior
PLC
RUN
PLC
RUN
PLC
RUN
PLC
RUN
30 – 633