HEIDENHAIN iTNC 530 Service Manual page 668

The list does not claim to be complete; ask your machine tool builder!
Possible
You may add your own experiences!
causes of error
The list does not claim to be complete; ask your machine tool builder!
Possible causes of
You may add your own experiences!
error for movement
monitoring ... B
3 – 668
Large backlash (ball screw, gear, belt, coupling, etc.)
Blunt tool
Excessive machining feed rate
Spindle speed too low
Insufficient lubrication
General mechanical stiffness
Vibration load on the machine
With analog axes: excessive offset (drift), faulty tachometer or carbon brushes
Hardware error in the control loop
Scanning head loose
Encoder defective
Encoder cable defective
Large backlash (ball screw, gear, belt, coupling, etc.)
Belt torn
Coupling defective
Gear defective
HEIDENHAIN Service Manual iTNC 530