HEIDENHAIN iTNC 530 Service Manual page 85

If the control is accessed via LSV2 protocol, the IP address of the external unit is entered in
Entry of IP
addition to the entry REMO A_LG.
addresses
Figure: Entry of IP address of accessing unit (laptop/PC) in the log
The IP address is shown in hexadecimal notation and can be converted to decimal notation as
follows:
The first two HEX digits from the left represent the first 3-digit decimal number of the IP address;
the next two HEX digits from the left represent the second 3-digit decimal number of the IP
address, etc.
Example for the IP address 0xA001F3B8:
Transformation IP address
Hexadecimal display
B8
F3
01
A0
Result IP address
Hexadecimal display
0xA001F3B8
Operating-system error messages require a rebooting of the control. During rebooting the
Entry of operating
operating-system error message is entered in the log. The time when the operating-system error
system error
message is entered in the log is indicated, i.e., the reboot time. In the headline of the operating-
messages
system error message the Greenwich Mean Time (Universal Time) is shown.
July 2010
Decimal display
184
243
1
160
Decimal display
160.1.243.184
8 – 85