How To Use This Service Manual; Target Group; About This Manual - HEIDENHAIN iTNC 530 Service Manual

1

How to Use this Service Manual

1.1

Target Group

This Service Manual has been written for specialist electricians for service, maintenance and
commissioning.
Specialists who perform work on the electrical system of a machine tool and its components
must have the required technical knowledge and competence!
1.2

About this Manual

This Service Manual assists service personnel in the field in diagnosing and
correcting errors on machine tools controlled by iTNC 530.
It includes:
The "List of NC Error Messages" on page 4 – 29 and the "Overview of Possible Error Patterns"
on page 5 – 55 include many references to the descriptions for error diagnosis. You will find
these descriptions in the chapters of this Service Manual sorted by topics.
The Service Manual does not provide any commissioning support!
It comprises the service possibilities with the current hardware and software at the editing date
of this manual. The service possibilities of your devices may differ from those described here.
The descriptions also provide information on any peculiarities of the hardware or software.
This manual is valid for:
For the instructions for the field service it is assumed that ...
July 2010
Error messages and types of errors that indicate technical defects
Information on possible error causes
Descriptions of error diagnosis
Application descriptions of the diagnosis tools
Information on corrective action
Data backup instructions
Theoretical explanations of functions and their correlations
iTNC 530, single-processor with NC software 340420 / 421
iTNC 530, single-processor with NC software 340422 / 423
iTNC 530, dual-processor with NC software 340480 / 481
iTNC 530, single-processor with NC software 340490 / 491
iTNC 530, dual-processor with NC software 340492 / 493
the machine had been working perfectly before the error occurred!
only original parts are used!
Note
Basic knowledge in Windows is required for some descriptions in this Service Manual
concerning the handling of the dual-processor control iTNC 530 and the use of a service
laptop or PC.
1 – 11