Test Of Hard Disk - HEIDENHAIN iTNC 530 Service Manual

12.4 Test of Hard Disk

When the control is started and there is no communication with the hard disk, normally the
No communication
following error message is displayed:
with the hard disk
Boot: Giving up
Reason is: Load processes failed
or
No bootable device available
At present no further tests are possible in the field!
If data are still transferred to the hard disk, some tests could be carried out in the field. --> See
Communication
following instructions.
with the hard disk
Additional and more comprehensive tests can only be performed at HEIDENHAIN
agencies!
July 2010
Check, whether the memory card is firmly in the slot, or check the hard disk on a functioning
iTNC 530 (if available).
Caution
Do not use your own hard-disk test or repair programs!
Data recovery at HEIDENHAIN or a specialized company could thereby become more
difficult or even impossible.
12 – 153