HEIDENHAIN iTNC 530 Service Manual page 581

MP Function and input
MP111.x Position encoder input for the spindle(s)
Input:
1 to 6: Position encoder inputs X1 to X6
35 to 38: Position encoder inputs X35 to X38
201 to 214: Position encoder inputs X201 to X214
MP111.0 Position encoder input for the first spindle
MP111.1 Position encoder input for the second spindle
MP112.x Assignment of speed encoder inputs to the axes
Input:
15 to 20: Speed encoder inputs X15 to X20
80 to 85: Speed encoder inputs X80 to X85
MP113.x Speed encoder for the spindle/spindles
Input:
15 to 20: Speed encoder inputs X15 to X20
80 to 85: Speed encoder inputs X80 to X85
MP113.0 Speed encoder for the first spindle
MP113.1 Speed encoder for the second spindle
MP115.0 Position encoder input 1 Vpp or 11 µApp
Format:
Input:
Bit 6 to bit 9: Position encoder inputs X35 to X38
Bit 10: No function
0: 1 Vpp
1: 11 µApp
MP115.1 Reserved
Format:
Input:
MP115.2 Input frequency of position encoder inputs
Format:
Input:
Bit 6 to bit 9: Position encoder inputs X35 to X38
Bit 10: No function
With 1 Vpp:
0: 27 kHz
1: 400 kHz
With 11 µApp:
0: 27 kHz
1: 140 kHz
July 2010
0: No position encoder input
0: No speed encoder input
0: No speed encoder input
%xxxxxxxxxxx
Bit 0 to bit 5: Position encoder inputs X1 to X6
%xxxxxxxxxxx
Enter %00000000000
%xxxxxxxxxxx
Bit 0 to bit 5: Position encoder inputs X1 to X6
SW version
and
behavior
REF
RESET
REF
RESET
30 – 581