Setting The Program Manager - HEIDENHAIN iTNC 530 Service Manual

12.6 Setting the Program Manager

The iTNC 530 offers several possibilities for setting the program manager.
PGM MGT setting
Enhanced 2
Enhanced 1
Standard
How to change the settings:
The following window appears:
12 – 162
Select the Programming and Editing operating mode.
(The program manager should not be open).
Call the code number window.
Call the interface setups. Here you can also find the setting for the program
manager.
Place the cursor in the line PGM MGT.
Press the GOTO key. --> A selection window opens.
Select a setting and confirm with the ENT key.
Leave the setting page with the END soft key or the END key.
Note
Descriptions in this iTNC 530 Service Manual use the program manager with the setting
Enhanced 1.
Advantages, e.g.
Complete mouse function, window sizes adjustable
Frequently used setting
Display as with old HEIDENHAIN controls
HEIDENHAIN Service Manual iTNC 530