Drive Symbols - HEIDENHAIN iTNC 530 Service Manual

13.9 Drive Symbols

The different drives are shown in the program management of the HEIDENHAIN control:
RS-232-C:\
RS-422:\
TNC:\
PLC:\
Depending on the operating mode, a symbol is displayed next to the external drive symbol:
Mode of
operation
FE1
EXT1, EXT2
Ethernet
July 2010
V.24 data interface (X27)
V.11 data interface (X28)
TNC partition (user data)
PLC partition (machine data via code number)
Drive symbol with
PGM MGT
13 – 207