HEIDENHAIN iTNC 530 Service Manual page 107

Now you can spread the time axis:
Horizontal
resolution
The signal details can be made visible:
With the following soft keys the recording can be shifted on the time axis:
July 2010
Switch to the next soft-key row.
Use the arrow keys on the keyboard to place the cursor 1 on a horizontal position of the
recording. This position serves as anchor for time spreading.
Use the following soft keys:
Display larger detail of the time axis (up to entire image)
Display smaller detail of the time axis
Note
The displayed time detail is shown in a small bar at bottom left.
Every new recording is displayed with this setting.
Shift the display range to the left.
Shift the display range to the right.
10 – 107