12 – 158
The following window appears:
Click No --> Windows is not supposed to be shut down!
You can now see the Windows user interface.
Click on My Computer/Control Panel/Administrative Tools/Computer Management/
Storage/Disk Management in succession.
--> Here the conditon of the data medium (hard disk) is shown, e.g., Healthy.
Click with the right mouse button on the drive to be tested.
Click on Properties in the open window.
Click now on Tools and for Error-checking on Check Now (in window Check disk no
additional information has to be selected).
Click on Start.
If no error has been detected, the error message Disk Check Complete is displayed.
If errors are detected, you should replace the hard disk. --> Contact the machine manufacturer
or a HEIDENHAIN service agency!
Note
The same test can also be performed with the Windows Command Prompt and the
command chkdsk, e.g. chkdsk C:.
HEIDENHAIN Service Manual iTNC 530