Display Ftp-Server Source-Ip; Display Ftp-User - 3Com Switch 4500 Family Manual

The 3com switch 4500 supports one user access at one time when it serves as the FTP server.

display ftp-server source-ip

Syntax
display ftp-server source-ip
View
Any view
Parameters
None
Description
Use the display ftp-server source-ip command to display the source IP address set for an FTP server.
If a source interface is specified for the FTP server, the IP address of the source interface will be
displayed and the FTP client can only use this address as the destination address to connect to the
FTP server.
If neither source interface nor source IP address is specified, 0.0.0.0 will be displayed. In this case,
the FTP client can use any reachable IP address on the FTP server as the destination address to
connect to the FTP server.
To set the source IP address for an FTP server, use the ftp-server source-interface or the ftp-server
source-ip command.
Examples
# Display the source IP address configured for the FTP server.
<Sysname> display ftp-server source-ip
The source IP you specified is 192.168.0.1

display ftp-user

Syntax
display ftp-user
View
Any view
Parameters
None
1-2