Ssp1 Clock Prescale Register (Ssp1Cpsr); Ssp1 Interrupt Mask Set Or Clear Register (Ssp1Imsc) - Wiznet W7500 Reference Manual

[3] RFF – Receive FIFO full, RO:
0 : Receive FIFO is not full.
1 : Receive FIFO is full.
[4] BSY – SSP busy flag, RO:
0 : SSP is idle.No effect
1 : SSP is currently transmitting and/or receiving a frame or the transmit FIFO
is not empty.

SSP1 Clock prescale register (SSP1CPSR)

Address offset: 0x0010
Reset value: 0x0000_00000
31 30 29 28
res res res res
15 14 13 12
res res res res
[7:0] CPSDVSR – Clock prescale divisor
This must be an even number from 2-254, depending on the frequency of SSPCLK. The
least significant bit always returns zero on reads.

SSP1 Interrupt mask set or clear register (SSP1IMSC)

Address offset: 0x0014
Reset value: 0x0000_00000
31 30 29 28
res res res res
15 14 13 12
res res res res
[0] RORIM – Receive overrun interrupt mask:
0 : Receive FIFO written to while full condition interrupt is masked.
W7500x Reference Manual Version1.1.0
27 26 25 24
res res res res
11 10 9 8
res res res res
27 26 25 24
res res res res
11 10 9 8
res res res res
23 22 21 20
res res res res
7 6 5 4
CPSDVSR
R/W R/W R/W R/W
23 22 21 20
res res res res
7 6 5 4
res res res res
19 18 17 16
res res res res
3 2 1 0
R/W R/W R/W R/W
19 18 17 16
res res res res
3 2 1 0
TXI RXI RTI ROR
M M M IM
R/W R/W R/W R/W
393 / 399