Wiznet WizFi360 Series Quick Start Manual
Hide thumbs
Also See for WizFi360 Series:
- At instruction set (68 pages) ,
- User manual (50 pages) ,
- Firmware update manual (16 pages)
Subscribe to Our Youtube Channel
Related Manuals for Wiznet WizFi360 Series
Summary of Contents for Wiznet WizFi360 Series
- Page 1 WizFi360 Quick Start Guide Version 1.0 WIZnet Co.,Ltd Copyright© 2019 © Copyright 2019 WIZnet Co., Ltd. All rights reserved.
- Page 2 History Date Description Aug.2019 Initial version WizFi360 Quick Start Guide...
- Page 3 Contents Environment setting .................................4 Using Serial command ..............................5 History ....................................2 WizFi360 Quick Start Guide...
-
Page 4: Environment Setting
1. Environment setting WizFi360EVB WizFi360io-C WiFI RESET RESET RTS/CTS Connect and Arduino Pin RXD1/TXD1 connect and USB or Arduino JP3 JP2 JP1 WizFi360EVB can use the AT command through UART1 and it also can consist that be used as an Arduino Pin. - Page 5 2. Using Serial command A brief AT command describe for operating of WizFi360 as below. If you need AT command example of another mode, see the documentation called “AT command examples”. Station Mode AT command Terminal AT+CWMODE_CUR=1 AT+CWDHCP_CUR=1,1 AT+CWLAP AT+CWJAP_CUR=”wizms1”,”maker0701” AT+CIPSTA_CUR? WizFi360 Quick Start Guide...
- Page 6 TCP Client / Command mode AT command Terminal AT+CIPSTART=”TCP”,”192.168.1.74”,5000 AT+CIPSENDBUF=10 0123456789 => 10byte data AT+CIPSENDEX=10 012\0 =>3byte data WizFi360 Quick Start Guide...
Need help?
Do you have a question about the WizFi360 Series and is the answer not in the manual?
Questions and answers