Channel-7 Dead Zone Counter Register (Pwmch7Dzcr) - Wiznet W7500 Reference Manual

[0] DZE – Dead Zone Enable
0 : Dead zone generation is disabled.
1 : Dead zone generation is enabled.

Channel-7 Dead Zone Counter Register (PWMCH7DZCR)

Base address : 0x4000_5700
Address offset : 0x3C
Reset value : 0x0000_0000
31 30 29 28
res res res res
15 14 13 12
res res res res
[9:0] DZC – Dead Zone Counter value
Dead zone generation counter value register. If the DZE bit in DZER is 1, dead
zone counter counts to this value and during this time, the two PWM output
waveforms are all 0.
W7500x Reference Manual Version1.1.0
27 26 25 24
res res res res
11 10 9 8
res res
23 22 21 20
res res res res
7 6 5 4
DZC
R/W
R/W
19 18 17 16
res res res res
3 2 1 0
269 / 399