Uart0Ris (Uart0 Raw Interrupt Status Register) - Wiznet W7500 Reference Manual

0: Disable UART0CRSINTR
1: Enable UART0CRSINTR
[0] RIMIM – nUART0RI modem interrupt mask
0: Disable UART0RIINTR
1: Enable UART0RIINTR

UART0RIS (UART0 Raw Interrupt Status Register)

Address offset: 0x003C
Reset value: 0x00-
The UART0RIS register indicates the raw interrupt status register.
31 30 29 28
res res res res
15 14 13 12
res res res res
[10] OERIS – Overrun error interrupt status
It indicates state of the UART0OEINTR interrupt.
[9] BERIS – Break error interrupt status
It indicates state of the UART0BEINTR interrupt.
[8] PERIS – Parity error interrupt status
It indicates state of the UART0PEINTR interrupt.
[7] FERIS – Framing error interrupt status
It indicates state of the UART0FEINTR interrupt.
[6] RTRIS – Receive timeout interrupt status
It indicates state of the UART0RTINTR interrupt.
[5] TXRIS – Transmit interrupt status
It indicates state of the UART0TXINTR interrupt.
[4] RXRIS – Receive interrupt status
It indicates state of the UART0RXINTR interrupt.
[3] DSRRMIS – nUART0DSR modem interrupt status
It indicates state of the UART0DSRINTR interrupt.
[2] DCDRMIS – nUART0DCD modem interrupt status
It indicates state of the UART0DCDINTR interrupt.
[1] CTSRMIS – nUART0CTS modem interrupt status
It indicates state of the UART0CTSINTR interrupt.
W7500x Reference Manual Version1.1.0
27 26 25 24
res res res res
11 10 9 8
OE BE PE
res
RIS RIS RIS
R R
R
23 22 21 20
res res res res
7 6 5 4
FE RT TX RX
RIS RIS RIS RIS
R R R R
19 18 17 16
res res res res
3 2 1 0
DRR DCD CTSR RI
RMIS RMIS MIS RMIS
R R R R
338 / 399