Overview Of Important Parameters - Siemens Sinamics S120 Function Manual

Communication
10.3 Communication via PROFINET IO
9. In HW-Config, click on "Station\Save and compile".
10. Then click on "Open object with STARTER" again
Figure 10-60 New project completed in STARTER
If there is a checkmark after each telegram type in STARTER, then the Shared Device has
been successfully configured.
10.3.8.3

Overview of important parameters

Overview of important parameters (see the SINAMICS S120/S150 List Manual)
● p8929 PN Remote Controller number
● p9601 SI enable, functions integrated in the drive (Control Unit)
● p9801 SI enable, functions integrated in the drive (Motor Module)
10.3.9 PROFIenergy
PROFIenergy is an energy management system for production plants, based on the
PROFINET communication protocol. The PROFIenergy functionality is combined in a profile.
Drive units, which have PROFIenergy functionality, can be certified in an approved
laboratory. Certified devices support the PROFIenergy commands and respond accordingly
to the requirements and operating states.
664
After completing the last save operation, in the STARTER window you will see that the
PROFIsafe telegrams have been assigned to PN-IO-1 and the drive telegrams to PN-IO.
Function Manual, (FH1), 01/2012, 6SL3097-4AB00-0BP2
Drive functions