Siemens Sinamics S120 Function Manual page 777

NOTICE
The drive can only be operated with an insufficient license for an option during
commissioning and servicing.
The drive requires a sufficient license in order for it to operate.
System response for an insufficient license for a function module
An insufficient license for a function module is indicated using the following fault and LED on
the Control Unit:
● F13010 licensing, function module not licensed
● The drive is stopped with an OFF1 response.
● LED RDY continuous light, red
NOTICE
It is not possible to operate a drive system with an insufficient license for a function module.
The drive requires a sufficient license in order for it to operate.
Information on performance expansion
The Performance option (order number: 6SL3074-0AA01-0AA0) is required from a
computation time utilization greater than 50%. The remaining computation time is displayed
in parameter r9976[2]. As of a CPU runtime utilization greater than 50%, alarm A13000 is
output and the READY LED on the Control Unit flashes green/red at 0.5 Hz.
System response for an insufficient license for an OA application
An insufficient license for an OA application is indicated using the following fault and LED on
the Control Unit:
● F13009 licensing, OA application not licensed
● The drive is stopped with an OFF1 response.
● LED READY continuous light, red
NOTICE
It is not possible to operate a drive system with an insufficient license for an OA application.
The drive requires a sufficient license in order for it to operate.
Drive functions
Function Manual, (FH1), 01/2012, 6SL3097-4AB00-0BP2
Basic information about the drive system
12.13 Licensing
775