Siemens Sinamics S120 Function Manual page 553

E_ZSW1 (status word for infeed)
See function diagram [2457].
Table 10- 35 Description of E_ZSW1 (status word for infeed)
Bit Meaning
0 Ready to start
1 Ready for operation
2 Operation enabled
3 Fault active
4 No OFF2 active
5 Reserved
6 Switching on inhibited
7 Alarm active
8 Reserved
9 Control request to PLC
10 Reserved
11 Pre-charging completed
12 Line contactor activated
13...1 Reserved
5
Drive functions
Function Manual, (FH1), 01/2012, 6SL3097-4AB00-0BP2
10.1 Communication according to PROFIdrive
Remarks
1 Ready to start
0 Not ready to start
1 Ready for operation
DC link pre-charged, pulses inhibited
0 Not ready for operation
1 Operation enabled
Vdc = Vdc_setp
0 Operation inhibited
1 Fault active
0 No fault
1 No OFF2 active
0 OFF2 active
– –
1 Switching on inhibited
Fault active
0 No "switching on inhibited" active
1 Alarm active
0 No alarm active
– –
1 Control requested
The PLC is requested to assume control. Condition
for applications with isochronous mode: Drive
synchronized with PLC system.
0 Local operation
Control only possible on device
– –
1 Bypass energized
Pre-charging is complete and the bypass relay for the
pre-charging resistors is energized.
0 Bypass not energized
Pre-charging not yet complete.
1 Line contactor activated
0 Line contactor not energized
– –
Communication
Parameter
BO: r0899.0
BO: r0899.1
BO: r0899.2
BO: r2139.3
BO: r0899.4
–
BO: r0899.6
r2139.7
–
BO: r0899.9
–
BO: r0899.11
BO: r0899.12
–
551