Wiring Example For Drives In Vector Control Mode - Siemens Sinamics S120 Function Manual

Basic information about the drive system
12.10 Rules for wiring with DRIVE-CLiQ
Figure 12-19 Example of a topology with VSM for booksize and chassis components
Table 12- 16 VSM connection
Component
Active Line Module booksize
Active Line Module chassis
Power Module chassis
Motor Module Chassis
12.10.4

Wiring example for drives in vector control mode

Example 1
A drive line-up with three Motor Modules in chassis format with identical pulse frequencies or
three Motor Modules in booksize format in vector control mode:
The Motor Modules chassis format with identical pulse frequencies or the Motor Modules
booksize format in vector control mode can be connected to one DRIVE-CLiQ interface on
the Control Unit.
In the following diagram, three Motor Modules are connected to the DRIVE-CLiQ socket
X101.
Note
This topology does not match the topology created offline by STARTER and must be
changed manually.
754
VSM connection
X202
X402
X402
X402 (active with PEM encoderless and "Flying restart"
function)
Function Manual, (FH1), 01/2012, 6SL3097-4AB00-0BP2
Drive functions