Siemens Sinamics S120 Function Manual page 69

● p1052 [0...n] CI: Speed limit RFG, negative direction of rotation
● p1083[0...n] CO: Speed limit in positive direction of rotation
● p1115 Ramp-function generator selection
● r1119 CO: Ramp-function generator setpoint at the input
● p1120[0...n] Ramp-function generator ramp-up time
● p1121[0...n] Ramp-function generator ramp-down time
● p1122[0...n] BI: Bypass ramp-function generator
● p1130[0...n] Ramp-function generator initial rounding time
● p1131[0...n] Ramp-function generator final rounding time
● p1134[0...n] Ramp-function generator rounding type
● p1135[0...n] OFF3 ramp-down time
● p1136[0...n] OFF3 initial rounding time
● p1137[0...n] OFF3 final rounding time
● p1138[0...n] CI: Up ramp scaling
● p1139[0...n] CI: Down ramp scaling
● p1140[0...n] BI: Enable ramp-function generator
● p1141[0...n] BI: Continue ramp-function generator
● p1143[0...n] BI: Ramp-function generator, accept setting value
● p1144[0...n C] CI: Ramp-function generator setting value
● p1145[0...n] Ramp-function generator tracking, intensity
● p1148 [0...n] Ramp-function generator tolerance for ramp-up and ramp-down active
● r1149 CO: Ramp-function generator acceleration
● r1150 CO: Ramp-function generator speed setpoint at the output
● p1151 [0...n] Ramp-function generator configuration
Parameterization with STARTER
The "ramp-function generator" parameter screen is selected via the following icon in the
toolbar of the STARTER commissioning tool:
Figure 2-15
Drive functions
Function Manual, (FH1), 01/2012, 6SL3097-4AB00-0BP2
STARTER icon for "ramp-function generator"
Extended setpoint channel
2.9 Ramp-function generator
67