Preconditions For Pn Gate - Siemens Sinamics S120 Function Manual

10.3.7.2

Preconditions for PN Gate

Hardware
● SINAMICS CU320-2PN with firmware version 4.5 or higher
● Communication Board Ethernet 20 (CBE20)
● Short Ethernet cable to connect CBE20 and CU320-2 PN (X 132)
● Control hardware with Ethernet (100 Mbit/s or higher),
Software
● SIMATIC Step7 firmware version 5.5 SP2 or higher
● STARTER firmware version 4.3, or
● SIMOTION SCOUT firmware version 4.3 or higher
PROFINET version
● SINAMICS PN Gate V2 is compatible with PROFINET V2.2
Scope of delivery PN Gate Dev-Kit (Development Kit)
The PN Gate development kit is supplied on a DVD and contains the following components:
1. Step7 addon setup
2. PN Gate driver
Drive functions
Function Manual, (FH1), 01/2012, 6SL3097-4AB00-0BP2
Recommendation: Ethernet cable with the order number MLFB: 6SL3060-4AB00-0AA0
for example, the SIMATIC Box IPC 427C.
– CD1
Step7 5.2 SP2 (minimum requirement)
general release with Step7 5.5 SP2, Starter 4.3, SINAMICS V4.5,
– Bin
Binary files of the driver in the Tar format.
– Src
The source files as a zip file and unzipped.
– Doc
Doxygen documentation as zip file. The Doxygen documentation is available in HTML
and PDF formats.
10.3 Communication via PROFINET IO
Communication
651