Siemens Sinamics S120 Function Manual page 7

Standard scope
The scope of the functionality described in this document may differ from the scope of the
functionality of the drive system that is actually supplied.
● It may be possible for other functions not described in this documentation to be executed
● Functions that are not available in a particular product version of the drive system may be
● Extensions or changes made by the machine manufacturer must be documented by the
For reasons of clarity, this documentation does not contain all of the detailed information on
all of the product types. This documentation cannot take into consideration every
conceivable type of installation, operation and service/maintenance.
Technical Support
Country-specific telephone numbers for technical support are provided in the Internet under
Contact:
http://www.siemens.com/automation/service&support
EC Declaration of Conformity
The EC Declaration of Conformity for the EMC Directive can be found on the Internet at:
http://support.automation.siemens.com
There – as a search term – enter the number 15257461 or contact your local Siemens office.
Structure
The Function Manual is structured as follows:
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Chapter 9
Chapter 10
Chapter 11
Chapter 12
Drive functions
Function Manual, (FH1), 01/2012, 6SL3097-4AB00-0BP2
in the drive system. However, no claim can be made regarding the availability of these
functions when the equipment is first supplied or in the event of servicing.
described in the documentation. The functionality of the supplied drive system should
only be taken from the ordering documentation.
machine manufacturer.
Infeed (Page 21)
Extended setpoint channel (Page 49)
Servo control (Page 69)
Vector control (Page 139)
U/f control (vector control) (Page 215)
Basic functions (Page 231)
Function modules (Page 317)
Monitoring and protective functions (Page 427)
Safety Integrated basic functions (Page 453)
Communication (Page 501)
Applications (Page 683)
Basic information about the drive system (Page 701)
Foreword
5