Direct Setpoint Input (Mdi) - Siemens Sinamics S120 Function Manual

Function modules
7.8 Basic positioner
Function diagrams (see SINAMICS S120/S150 List Manual)
● 3616 Traversing blocks mode (r0108.4 = 1)
● 3617 Travel to fixed stop (r0108.4 = 1)
● 4025 Dynamic following error monitoring, cam controllers (r0108.3 = 1)
Overview of important parameters (see SINAMICS S120/S150 List Manual)
● p1528 CI: Torque limit, upper/motoring, scaling
● p1529 CI: Torque limit, lower/regenerative scaling
● p1545 BI: Activate travel to fixed stop
● r2526 CO/BO: LR status word
● p2622 EPOS traversing block, task parameter
● p2634 EPOS Fixed stop maximum permissible following error
● p2635 EPOS Fixed stop monitoring window
● p2637 BI: EPOS Fixed stop reached
● p2638 BI: EPOS Fixed stop outside monitoring window
● r2683 CO/BO: EPOS status word 1
● r2686 CO: EPOS Torque limit effective
● r2686 CO: EPOS force limiting active (for linear motors)
7.8.9

Direct setpoint input (MDI)

Features
● Select direct setpoint input (p2647)
● Select positioning type (p2648)
● Direction selection (p2651, p2652)
● Setting-up (p2653)
● Fixed setpoints
384
– CO: Position setpoint (p2690)
– CO: Velocity setpoint (p2691)
– CO: Acceleration override (p2692)
– CO: Deceleration override (p2693)
Function Manual, (FH1), 01/2012, 6SL3097-4AB00-0BP2
Drive functions