Changing The Offline Topology In Starter - Siemens Sinamics S120 Function Manual

12.10.1

Changing the offline topology in STARTER

The device topology can be changed in STARTER by shifting the components in the
topology tree.
Table 12- 15 Example: changing the DRIVE-CLiQ topology
12.10.2 Binding DRIVE-CLiQ rules
DRIVE-CLiQ rules
The wiring rules below apply to standard cycle times (servo control 125 µs, vector control
250 µs). For cycle times that are shorter than the corresponding standard cycle times,
additional restrictions apply due to the computing power of the Control Unit (configured using
the SIZER configuration tool).
Drive functions
Function Manual, (FH1), 01/2012, 6SL3097-4AB00-0BP2
Topology tree view
Basic information about the drive system
12.10 Rules for wiring with DRIVE-CLiQ
Remark
Select the DRIVE-CLiQ component.
Keeping the mouse button depressed,
drag the component to the required
DRIVE-CLiQ interface and release the
mouse button.
You have changed the topology in
STARTER.
745