Table of Contents
Advertisement
Electrical System
11.
Tighten the alternator cover bolts to 9
Nm.
12.
Incorporating a new O-ring seal, fit the starter motor
and tighten the starter fixings to 28
Nm.
13.
Refit the engine (see page
10-5>.
14.
Reconnect the battery positive (red) lead first.
15. Refit the seat (see page
17-17
for Rocket III and
classic, see page
17-18
for Rocket III Touring).
Alternator Rectifier
Note:
•
The alternator rectifier is attached to the
battery box. The rectifier does not contain any
serviceable parts and must be replaced if
faulty.
Removal
1.
Remove the seat (see page
17-17
for Rocket III and
Classic, see page
17-18
for Rocket III Touring).
2.
Disconnect the battery, negative (black) lead first.
3.
Remove the left hand side cover (see page
17-19).
4.
Disconnect both mUlti-plugs from the alternator
rectifier.
1. Rectifier
2. Multi-plugs
5.
Release the two screws securing the rectifier to the
battery box and withdraw the rectifier.
Installation
1.
Position the rectifier to the battery box and secure
with the two screws. Tighten the screws to 9
Nm.
2.
Reconnect the two mUlti-plugs to the rectifier.
3.
Refit the left hand side cover (see page
17-19).
4.
Reconnect the battery positive (red) lead first.
5.
Refit the seat (see page
17-17
for Rocket III and
classic, see page
17-18
for Rocket III Touring).
18.24
SelVice Manual- Rocket Ill/ Classic / Touring
Advertisement
Chapters
Table of Contents
