Table of Contents
Advertisement
Frame and Bodywork
Front Mudguard - Rocket III Touring
Removal
Before starting work, ensure the motorcycle is stabilised
and adequately supported. This will help prevent it from
falling and causing injury to the operator or damage to
the motorcycle.
1.
Remove the front wheel (see page 16.10).
2.
Release the mudguard fixings and manouvre the
mudguard downwards to remove.
1.
Mudguard fixings
Installation
1.
Manoeuvre the mudguard into position between the
forks.
2.
Fit and tighten the mudguard fixings to 27 Nm.
3.
Refit the front wheel (see page 16.10>
Rear Mudguard - Rocket III and
Classic
Removal
Before starting work, ensure the motorcycle is stabilised
and adequately supported. This will help prevent it from
falling and causing injury to the operator or damage to
the motorcycle.
1.
Remove the seats (see page 17-
17).
2.
Disconnect the battery, negative (black) lead first.
3.
Remove both side covers (see page 17-19).
4.
Trace the wiring back from the number plate light,
rear
indicators
and
rear
light assembly
and
disconnect their wiring connectors from the main
harness. The connections will be near to the engine
management ECU on the right hand side of the
motorcycle.
1.
Wiring connections
Note:
•
Prior to
disconnection, note the relative
locations
of
the
wires
to
their
mating
connectors.
17.24
SelVice Manual- Rocket Ill/ Classic / Touring
Advertisement
Chapters
Table of Contents
