Bearing Removal - Triumph Rocket III Classic Service Manual

Front Suspension
10. Support the handlebar then unscrew the bolts and
lift off the handlebar clamp.
1.
Handlebar clamp
2. Fixings
11. Position and support the handlebar clear of the top
yoke, ensure the master cylinder remains in an
upright position.
All models
Note:
• When the top yoke is removed (below), the
steering lock and headlights will also be
removed as part of the assembly.
12. Slacken and remove the top nut and washer. Lift and
support the top yoke and headlight assembly to gain
access to the bearing adjuster nut and locknut.
1
1.
Top nut
13. Remove the locknut and adjuster nut.
1.
Locknut
2. Adjuster nut
14. Detach the bottom yoke from below the frame
head stock.
Bearing removal
1.
Using a suitable drift, evenly and progressively drive
the bearing outer races from the frame headstock.
2. Remove the inner race and dust seal from the
bottom yoke using a press or puller.
Protect the threads of the bottom yoke when using a
press or puller as damaged threads may mean replacing
the yoke completely.
14.24
SelVice Manual- Rocket Ill/ Classic / Touring