Starter Motor; Removal; Installation - Triumph Rocket III Classic Service Manual

Starter Motor
Removal
1.
Remove the seat (see page 17-17 for Rocket III and
Classic, see page 17-17 for Rocket III Touring).
2. Disconnect the battery, negative (black) lead first.
3.
For Rocket III and Classic only:
Remove the
exhaust silencers and catalyst box (see page 11-201>.
4. For Rocket III Touring only: Remove the exhaust
silencers and exhaust link box (see page 11-204).
5. Disconnect the solenoid connection from the main
wiring harness.
6. Ease the rubber boot from the starter cable, release
the nut and disconnect the cable.
1. Cable
2. Boot
3. Starter motor
Z Release the two bolts securing the starter motor to
the alternator cover.
1. Starter motor
2. Bolts
8. Withdraw and remove the motor.
Electrical System
Installation
1. Fit a new O-ring to the starter motor.
Arrowed - O-ring
2. Position the starter to the alternator cover and retain
with the two bolts. Tighten the bolts to
28 Nm.
3. Locate the starter cable to its connection pole. Fit the
nut and tighten it to
7 Nm.
4. Refit the boot.
5. Reconnect the solenoid to the main harness.
6.
For Rocket III and Classic only:
Refit the catalyst
box and silencers (see page
11-203).
Z
For Rocket III Touring only:
Refit the exhaust link
box and silencers (see page
11-207>.
8. Reconnect the battery, positive (red) lead first.
9. Refit the seat (see page 17-17 for Rocket III and
classic, see page 17-18 for Rocket III Touring).
SelVice Manual- Rocket Ill/ Classic / Touring / Touring
18.25