Triumph Rocket III Classic Service Manual page 361

(
9. Release the screw securing the fuel pipe bracket and
fuel level sensor to the mounting bar. Discard the
screw after removal
1
"'"
1. Fuel pipe bracket
2. Fuel level sensor
10. Disconnect the electrical connection from the pump.
-
1 . Fuel pump
2. Electrical connection
11. Release the clip securing the remaining fuel hose to
the pump, then ease the fuel pipe away from the
filter.
1
2
"' "
1. Fuel pipe
2. Pump
Fuel System/Engine Management
12. Release the screw securing the fuel pump clamp to
its mounting bar. Discard the screw after removal.
"'"
1. Fuel pump
2. Fuel pump clamp
3. Mounting bar
13. The pump may now be removed.
Inspection
1. Inspect all hoses for cracks, splits, fraying and other
damage. Replace as necessary.
2. Check all hose clips for cracks and signs of distortion.
Replace as necessary.
Assembly
1. Position the fuel pump to the mounting bar,
ensuring the feet of the rubber isolator engage
correctly in the fork
2. Isolator feet
SelVice Manual - Rocket Ill/ Classic / Touring
11.157