Function Tests; Checks/Adjustments; Adjustments; Adaption Status - Triumph Rocket III Classic Service Manual

Fuel System/Engine Management
Function Tests
The system allows the diagnostic tool to perform a series
of function tests on various actuators in the engine
management system. In some cases it is necessary to
make a visual observation of a component and in others, if
faults are present, DTCs will be logged.
The function tests available are:
Function Examined
Report Method
Instrument panel
Visual inspection
of
instruments
Idle speed control stepper Stored fault code'
motor
Purge control valve Stored fault code'
Fuel pump relay
Stored fault code'
Fuel pump operation Stored fault code'/Fuel
pressure test
Cooling fan
Stored fault
code'/fan
operation
2nd
throttle control Stored fault code'
stepper motor
, If a fault
IS
detected.
Checks! Adjustments
Adjustments
Using the Triumph diagnostic tool, it is possible to reset
the ECU to the factory default settings and to balance the
throttle bodies.
Further facilities are provided to allow correct
replacement/adjustment of the primary throttle position
sensor and the primary throttle stepper motor. These
facilities are needed as, after replacement of the parts
concerned, adjustments have to be made to specific
voltage settings, all with the throttles in a specific position.
Full details of these procedures are provided later in this
section.
Adaption status
Because the fuel system is adaptive, the tool is able to
automatically adjust to new working conditions. This
screen displays information as to the adaption status of the
vehicle which will show if it has adapted or not.
Function Examined Report Method
Closed throttle position adaptedlnot adapted
reference status
Idle speed control
%
adaption status
Oxygen sensor adaption %
status (off idle)
Oxygen sensor adaption
%
range (off idle)
Oxygen sensor adaption %
status (idle)
Oxygen sensor adaption
%
range (idle)
Build data
The following items of build data can also be read.
Function Examined
Vehicle Identification Number NIN)
Triumph ECM part number
ECM manufacturer's part number
ECM serial number
Software version number (tune number)
11.30
SelVice Manual - Rocket
1111
Classic
1
Touring