Triumph Rocket III Classic Service Manual page 111

Z Lock the inner and outer drums together using
service tool 3880025-T0301. Depress the rear brake
pedal to prevent the engine from turning, and
tighten the clutch centre nut to 105 Nm. Remove
the service tool.
1. 3880025-T0301
8. Stake the clutch centre nut to the input shaft.
Clutch
9. Disengage second gear and check for free rotation
of the clutch inner drum.
10. Coat all clutch friction plates in clean engine oil
11. Fit the friction plates, steel plates, anti-judder seat and
spring to the clutch basket, in the same order as
noted during removal.
Note:
• The inner and outermost friction plates are
different to the remainder and are also
different to each other. They must not be fitted
in any other positions.
12. Refit the clutch pull rod.
13. Refit the clutch pressure plate together with the
springs and bolts. Tighten the bolts to 10 Nm.
Note:
• The pull rod should be free to move in and out
and also it should be free to turn.
14. Fit the clutch cover (see page 4-7>.
SelVice Manual - Rocket Ill/ Classic / Touring
4.11