2.
Position the balancer bearings such that the dowel
pegs locate in the slots in the upper crankcase.
1.
Bearing dowels
2. Upper crankcase slots
Balancer
3.
Ensure the circlips fitted to the balancer bearings
locate and seat correctly in corresponding grooves,
also in the upper crankcase.
cbrk
1.
Circlips
2. Grooves
4.
Check that the balancer and crank dot marks are still
in alignment.
5.
Assemble the crankcase halves (see page
5-8>.
6.
Refit the engine to the frame (see page to-5>.
SelVice Manual- Rocket Ill/ Classic / Touring
7.5