Triumph Rocket III Classic Service Manual page 384

Fuel System/Engine Management
6.
Slacken the adjuster locknuts at the throttle body
such that they will allow the outer cables to be
detached from the cable brackets.
1. Opening cable adJuster
2. Closing cable adJuster
3. Locknuts
Z Detach the inner cables from the throttle cam.
Note:
• Rocket III and Classic continue from step 8 to
step 13. Then continue from step 17.
• Rocket III Touring continue from step
14
to
step 17.
Rocket III and Classic
8. At the twist grip end, remove the screws securing the
right hand switch cube to the brake master cylinder.
2
'""
1. Right hand switch cube
2. Screws
9. Separate the switch cube from the master cylinder.
10. Release the screw and union securing the throttle
cables to the master cylinder.
1
-
1 . Throttle cables
2. Screw
3. Union
11. Release, but do not remove completely, the two
screws securing the master cylinder to the handlebar.
1. Master cylinder
2. Screws
11.180
Service Manual - Rocket 1111 Classic / Touring