Triumph Rocket III Classic Service Manual page 385

(
12. Ease the master cylinder away from the handlebar to
allow space for the throUle cables to be detached
from the twist grip. Detach the cables from the twist
grip.
1
~
"'"
1.
Twist grip
2. Throttle cables
13. For Rocket III and Classic, continue from step 1Z
Rocket III Touring
14. At the twist grip end, release the screw and union
securing the throttle cables to the switch cube.
""
1.
Throttte cables
2. Screw
3. Union
Fuel System/Engine Management
15. Remove the screws securing the right hand switch
cube.
1.
Twist grip
2. Screws
16. Detach the switch cube then release the inner cables
from the twist grip.
1.
Opening cable
2. Closing cable
All
Models
1Z Note the routing of the throUle cables, then remove
them from the frame.
SelVice Manual - Rocket Ill/ Classic / Touring
11.181