Table of Contents
Advertisement
Frame and Bodywork
Windscreen - Rocket III Touring
Removal
1.
Upper mounting
2. Lock handle
3.
Lock
4.
Lower mounting
5.
Windscreen
1.
Stand astride the front wheel and pull the lock
handles towards the windscreen to release the locks.
2.
Lift the windscreen to detach it from the mountings.
3.
If required, remove the windscreen mountings from
the top and bottom yokes.
1.
Screw
2. Windscreen mounting
Installation
1.
If winscreen mountings have been removed, refit the
mountings to the top and bottom yokes. Tighten the
screws to 15 Nm.
2.
Align the windscreen mounting slots to the
mountings on the forks.
Note:
•
An audible click can be heard when the locks
are engaged.
3.
Slide the windscreen down until the upper mounting
are locked into position.
To prevent detachment of the windscreen during riding,
after fitting grasp the windscreen and pull firmly
upwards. If the windscreen locks are not correctly
secured the windscreen will detach from the locks. A
loose or detached windscreen could cause loss of
motorcycle control and an accident.
17.30
SelVice Manual - Rocket Ill/ Classic / Touring
Advertisement
Chapters
Table of Contents
