Table of Contents
Advertisement
WheelslTyres
Front Wheel- Rocket III Touring
Removal
Before starting work, ensure the motorcycle is stabilised
and adequately supported. This will help prevent it from
falling and causing injury to the operator or damage to
the motorcycle.
1.
Raise and support the front of the motorcycle.
2.
Detach and support both brake calipers.
Note:
•
It is not necessary to disconnect the brake
hoses.
Do not allow the calipers to hang on the brake hoses as
this may damage the hoses. Damaged hoses could
cause brake failure leading to loss of control and an
accident.
3.
Slacken both pinch bolts at the lower end of the right
hand fork.
1. Fork pinch bolts
4.
Working from the right hand side, release and
remove the wheel spindle which is threaded into the
left hand fork.
\
cbwp1
1.
Wheel spindle
5.
Remove the wheel, recovering the spacer from the
left hand side.
cbwq1
1.
Spacer
6.
Place the wheel on wooden blocks to prevent
damage to the brake discs.
Do not allow the wheel to rest on either brake disc as
this may damage the disc leading to loss of motorcycle
control and an accident.
To prevent wheel and wheel bearing damage, ensure
dirt and debris are not allowed to enter the wheel
bearings.
Z
Thoroughly clean all components and inspect for
wear or damage.
16.10
SelVice Manual - Rocket III I Classic I Touring
Advertisement
Chapters
Table of Contents
