Triumph Rocket III Classic Service Manual page 484

Front Suspension
11. Refit the horn and bracket assembly and connect the
horn electrical connectors. Tighten the bolt to
18Nm.
1. Ham and bracket assembly bolt
2. Ham electrical connectors
12. Refit the headlight. Tighten the screws to 9 Nm.
T90B04Bl
1. Headlight screw (1 of 2)
Note:
• For the alignment of the top yoke, do not
tighten the top nut.
13. Seat the top yoke assembly in position then refit the
washer and top nut. Do not fully tighten the top nut.
1
Q
ceta
1. Top nut
14. Install the forks (see page 14-28>.
15. Check that the free play has been eliminated and
that the steering can be turned freely from lock to
lock without any sign of tightness. Re-adjust if
necessary.
Operation of the motorcycle with incorrectly adjusted
steering head bearings, either too loose or too tight,
may cause a dangerous riding condition leading to loss
of motorcycle control and an accident.
14.42
SelVice Manual - Rocket Ill/ Classic / Touring