Disassembly
1.
Remove the pivot locknut and bolt securing the
brake lever to the master cylinder. Remove the lever.
2.
Detach the dust cover from the lever end of the
cylinder.
cbzl
1.
Dust cover
3.
Remove the circlip from beneath the dust cover.
1.
Circlip
Brakes
4.
Remove the piston set from the master cylinder bore
noting the relative position of the seals and piston
components.
1.
Piston Set
Inspection
1.
Check the following for wear, damage, cracks or
deterioration:
cb.1
1.
Cylinder bore
2. Dust cover
3.
Spring
4. Piston
5. Pivot Bolt
Note:
•
Always renew the piston and seal set if the
cylinder is dismantled.
SelVice Manual - Rocket Ill/ Classic / Touring
15.21