Bearing Removal; Installation - Triumph Rocket III Classic Service Manual

Front Suspension
10. Detach the bottom yoke from below the frame
headstock.
Bearing removal
1. Using a suitable drift, evenly and progressively drive
the bearing outer races from the frame headstock.
2. Remove the bearing from the bottom yoke using a
press or puller.
Protect the threads of the bottom yoke when using a
press or puller as damaged threads may mean replacing
the yoke completely.
Installation
1. Press a new bearing onto the steering stem of the
bottom yoke.
1.
Bearing
2. Press
3. Press bed
2. Evenly and progressively drive new bearing outer
races into the frame headstock.
- ' - - - 1
1.
Headstock
2. Bearing outer race
3. Lubricate the headstock bearings using multi-
purpose grease.
4. Insert the lower yoke to the frame headstock, fit the
upper bearing and retain with the bearing cover,
adjuster nut and locknut.
14.40
SelVice Manual - Rocket Ill/ Classic / Touring