Installation - Triumph Rocket III Classic Service Manual

Cooling
Installation
1. Align the radiator to the lower mounting stud,
reconnect the cooling fan before fitting the upper
and lower mounting bolts.
2. Tighten the mounting bolts to 9
Nm.
3. Reconnect the top and bypass hoses to the
thermostat housing and head respectively. Tighten
the hose clips.
4. Reconnect the bottom hose to the radiator. Tighten
the hose clip.
5. In the following order, refit the:
Front radiator grille if removed, tighten the
fixing to
3 Nm).
Upper radiator cover, tighten the fixing to
3 Nm).
Side radiator grilles, tighten the side fixing to
3 Nm and the upper fixing t07 Nm).
Lower radiator cover, tighten the fixing to
4Nm.
6. Reconnect the battery, positive (red) lead first.
Z Refit the seat (see page 17-17 for Rocket III and
Classic, see page 17-18 for Rocket III Touring).
8. Refill the cooling system (see page
12-7>.
9. Refit the radiator side covers, tighten the top fixing to
4 Nm and the side fixings to 7 Nm.
12.14
Service Manual- Rocket Ill/ Classic / Touring