Triumph Rocket III Classic Service Manual page 203

Note:
• Rocket III shown, Rocket III Classic and Touring
are similar.
19. Align the brake pedal with the pushrod, engage the
clevis and retain it with the clip. Ensure the clip is
fitted as shown below.
1. Pedal
2. Pushrod
3. Clevis
4. Clip
20. Refit the heel guard tightening the fixings to 9
Nm.
1
~
~\~ ~-;;;
'f7
re
Z jJ
2
1. Heel guard
2. Heel guard fixings
Engine Removal and Refit
21. Fit the brake pipe to its clip.
I
cbug
~~~~=;;;;;:\IJ~~~~f--
1. Brake pipe
2. Clip
22. Refit the front mudguard (see page 17-23 for Rocket
III and Classic, see page 17-24 for Rocket III Touring).
23. Refit the front wheel (see page 16-9 for Rocket III
and Classic, see page 16-11 for Rocket III Touring).
24. Refit the swinging arm, bevel box and rear
suspension units (see section
6>.
25. Refit the rear wheel (see page 16-14 for Rocket III
and Classic, see page 16-17 for Rocket III Touring).
26. Refit the oil tank (see page 9-
17).
2Z Refit the throttle bodies and intake hose (see page
11-190>.
28. Reconnect and adjust the throttle cables (see page
11-182 to reconnect the throttle cables, see page 11-
183 to adjust the throttle cables.
29. Refit the radiator (see page 12-14).
30. Refit the exhaust headers (see page 11-203) for
Rocket III and Classic, see page 11-207 for Rocket III
Touring).
31. Refit the fuel tank (see page
11-150
for Rocket III
and Classic, see page 11-154 for Rocket III Touring).
32. Refill the engine with oil (see page 9-9).
33. Refit the left and right side panels (see page 17-19).
34. Reconnect the battery, positive (red) lead first.
35. Refit the seat (see page 17-17 for Rocket III and
Classic, see page 17-18 for Rocket III Touring).
36. Lower the motorcycle to the ground and place it on
the side stand.
3 Z Start the engine and check for oil, coolant and any
other leaks.
38. Check and adjust the engine oil level.
SelVice Manual - Rocket Ill/ Classic / Touring
10.7