Indicator Lights; Bulb Replacement - Rocket Iii And Classic; Bulb Replacement - Rocket Iii Touring - Triumph Rocket III Classic Service Manual

Indicator Lights
Bulb Replacement - Rocket III and Classic
1.
Lens
2. Lens screw
3. Bulb
Note:
•
1.
The lens on each indicator light is held in place
by two screws.
Release the screws and remove the lens to gain
access to the bulb for replacement.
The bulb becomes hot during use. Always allow
sufficient time for the bulb to cool before handling.
Avoid touching the glass part of the bulb. If the glass is
touched or gets dirty, clean with alcohol before re-use.
Electrical System
Bulb Replacement - Rocket III Touring
cenk1
fill
1.
Screwdriver
1
cenj1
1.
Lens
2. Locating tang
3. Bulb
1.
Use a flat bladed screwdriver to carefully remove
remove the lens from the indicator to gain access to
the bulb for replacement.
The bulb becomes hot during use. Always allow
sufficient time for the bulb to cool before handling.
Avoid touching the glass part of the bulb. If the glass is
touched or gets dirty, clean with alcohol before re-use.
When installing the lens, ensure that the locating tang is
correctly aligned to the indicator body.
2. To install the indicator lens, align the locating tang
with the indicator body and push the lens until the
retaining clips secure the lens.
SelVice Manual- Rocket Ill/ Classic / Touring / Touring
18.21