Camshaft Drive Chain Blades; Removal; Installation - Triumph Rocket III Classic Service Manual

Camshaft Drive Chain Blades
Removal
Before starting work, ensure the motorcycle is stabilised
and adequately supported. This will help prevent it from
falling and causing injury to the operator or damage to
the motorcycle.
1. Remove the camshaft drive chain (see page 3-10>.
1. Remove the cylinder head (see page 3-20>.
Note:
• Note the position of the camshaft drive chain
blade bolt washer for installation.
2. Remove the camshaft drive chain tensioner blade.
Cylinder Head
Note:
• Note the position of the camshaft drive chain
rubbing blade upper mounting for installation.
4. Move the camshaft drive chain rubbing blade
upwards to detach the upper mounting then slightly
rotate the blade clockwise and remove the blade.
cexk
r
1. Camshaft drive chain rubbing blade
2. Upper mountings
Installation
1. Refit the camshaft drive chain rubbing blade. Ensure
the upper mounting is correctly located on the upper
crankcase as noted from the removal.
2. Refit the camshaft drive chain rubbing blade bolt and
washer, as noted from the removal, and tighten to
18Nm.
3. Refit the camshaft drive chain tensioner blade.
4. Refit the camshaft drive chain tensioner blade bolt
1.
Camshaft drive chain blade bolt
and washer, as noted from the removal, and tighten
2. Washer to
18 Nm.
3. Camshaft drive chain tensioner blade
3. Remove the camshaft drive chain rubbing blade bolt
and washer.
00 0 0
1.
Camshaft drive chain blade bolt
2. Washer
3. Camshaft drive chain rubbing blade
5. Refit the cylinder head (see page
3-21).
6. Refit the camshaft drive chain (see page
3-11).
SelVice Manual- Rocket Ill/ Classic / Touring
3.13