Triumph Rocket III Classic Service Manual page 369

11. Make a note of (or mark) the hose locations before
disconnecting them from the evaporative canister.
1. Evaporative canister
2. Hoses
3. Cable ties
12. Remove the canister.
13. Disconnect the electrical connections to the fall
detection switch and alternator rectifier.
o
o
-
1 . Fall detection switch connector
2. Alternator rectifier connectors
14. Release the fir-tree plugs securing the fuse box to
the battery box.
""" 11
----===
1. Fuse box
2. Fir-tree plugs
Fuel System/Engine Management
15. Manoeuvre the relay pack, fuse box and other
electrical connectors aside.
Note:
• For Rocket III and Classic continue from step 16
to step
26.
Then continue from step
35
to step
47.
• For Rocket III Touring continue from step 27 to
step 47.
Rocket III and Classic
Note:
• Before proceeding, make a note of the cable
routings around the ECM and ECM bracket.
16. Working on the right hand side, remove the screws
securing the engine management ECM to its
bracket.
1. ECM
2. Screws
lZ Ease the ECM from its bracket then disconnect the
two electrical connections.
18. Place the ECM to one side.
19. Remove the three screws from the
ECM
bracket,
then detach the bracket.
,
"""
1. ECM bracket
SelVice Manual - Rocket Ill/ Classic / Touring
11.165